Introduction
Imagine that you have just taken a bath at night and enjoy the comfort of the bath. You step out of the bathroom, suddenly hear the tap dripping, and think to yourself, "This water bill shouldn't matter."
But did you know that a dripping faucet can waste up to 3,000 gallons of water a year? That's the equivalent of 50 standard bathtub baths, far more than you actually use on a daily basis. A dripping faucet is not just a minor problem, it can also signal a potential failure of plumbing and faucet equipment in your home. Over time, the loss of water bills from dripping can creep up, eventually making your bill even higher.
Most of the 10,000 gallons of water wasted annually by leaky faucets and pipes in U.S. homes, according to the EPA, can easily be solved by replacing bathtub faucet replacement parts. Many times, the solution is much simpler than you think, and you can even fix it yourself.
If you have a similar faucet problem, the following five common signs can help you identify whether you need a bathtub faucet replacement part and show you how to restore your faucet to its best condition with a simple fix.
1. Persistent Dripping
The great loss hidden behind the sound of dripping water
How often do you hear the tap "tick" and think it's just a trivial problem? In fact, a faucet constantly dripping, not only waste water, but also lead to soaring water bills, and gradually form water stains, mold, and even corrosion problems, affecting the sanitation of the bathroom environment. Many families ignore the warning signs of dripping faucets, only to regret it when the problem becomes serious.
Possible cause
The washer wear: The single faucet use most seals the part is the washer, and the water takes size in favor of the flow, outside the changes of the water temperature, the washer can slowly wear or harden, so that it can not be completely closed.
Damage to the cartridge: The cartridge is a major element that controls water flow and temperature. As the spool wears out or when deposits build up, the faucet cannot be closed tightly and water drips.
Corrosion of the Valve Seat: The valve seat is the part that seals the faucet to the pipe. Reasons: Long-term use, scale and minerals accumulating on the valve seat, water quality problems lead to metal corrosion, affecting sealing, resulting in water leakage.
Solution
Before you solve dripping, you would first need to analyze which of the problem contributes to it. For many repairs, the gasket or spool is simply replaced. For the case of washer wear, is the removal of the faucet, replace the washer; If the spool is damage, generally our solution is to replace the spool, and restoration, to restore the normal close of the water flow. If the seat is corroded you may need to clean and replace bathtub faucet replacement parts.
Once these parts are replaced you will be able to end the drip problem, save money on your water bill, and prevent further damage to your pipes.
2. Faucet Handle Loose or Stiff Handle
Difficulty regulating the flow of water? Your faucet handle may be the culprit
Do you often find that the handle of the faucet becomes loose, or that the flow of water does not adjust smoothly when you twist the handle forcefully? This phenomenon may not only make you inconvenient to use, do not repair for a long time, but also may cause more internal damage.
Possible cause
Loose or rusty: The Handle of the faucet is usually fixed by the Screw, if the screw is loose or affected by scale and moisture, it may rust or corrosion, resulting in instability of the handle or even fall off.
Cartridge damage: The valve cartridge controls the water flow switch and water flow temperature, and when the internal seal of the valve cartridge ages or deposits occur, the water flow regulation becomes inflexible, resulting in the handle being unable to rotate smoothly or even out of control.
Solution
First, check and tighten the fixing screws on the faucet handle, use rust remover to clean the rust on the screws, and replace the new screws if necessary. If the handle problem persists, the spool may need to be replaced. Replacing the spool with a new spool can restore the smooth operation of the faucet and avoid possible future water flow control difficulties. If you are not sure which parts need to be replaced, choosing bathtub faucet replacement parts that are suitable for your faucet model will allow you to do more with less.
3. Low or Uneven Water Pressure
Weaker water flow, uneven pressure? The problem isn't just with the pipes
When you take a shower, if you find that the water running from the faucet has become slow or the pressure between hot and cold water is uneven, it may mean that there is a problem inside the faucet. Although it sometimes looks like the water pressure is just a "water pipe problem", the actual situation may be caused by the failure of the internal components of the faucet.
Possible cause
Faucet aerator: a faucet aerator is a device that changes the water flow, and the long uncleaned faucet aerator crystallizes scale and sand, and the blocked water flow can cause low water pressure.
Cartridge sediment build-up: In areas with hard water, this sediment can buildup in the cartridge, which can block the flow of water and lower pressure.
Pipe blockage: Once in a while, residue within the pipe may even disease the water venture, which lands up making the stream different.
Solution
Often cleaning the bubbler itself and inspecting whether it has been scaled up will help the water flow nicely. If after cleaning the water pressure is still low, it is possible that the minerals have builded-up inside the spool causing the water to be blocked. The only thing left to do here is ideally to change the spool. You can buy bathtub faucet replacement parts for your model faucet and switch them out yourself using the instructions or with help from a professional.
4. Inconsistent Water Temperature
Hot and cold? Your temperature control spool may be malfunctioning
If during the bath, the water temperature keeps changing hot and cold, and that the water temperature changes with the rotation of the faucet, then the temperature control spool of the faucet is damaged. This not only makes bathing an unpleasant experience, but if misuse continues over time, hinders other components of the plumbing system as well.
Possible cause
Thermostatic Cartridge Failure: The thermostatic cartridge is a component and the one that regulates the water temperature, if a fault occurs, the water temperature will no longer stabilize due to damage or mineral deposits inside the cartridge.
Problem with Diverter Valve: The diverter's job is to direct the flow of hot and cold water, and if it stops working, the water temperature will vary.
Solution
To fix this issue, the fastest way we recommend is to swap the temperature control spool. In case of a damaged temperature control spool, by choosing bathtub faucet replacement parts with the same specs as those that need to be replaced, and carrying out the installation process for bathtub faucet replacement parts in steps. If the problem continues, you need to check and replace the shunt so that hot with cold water is properly switched.
5. Unusual Noises from Faucet
The noise of the faucet cannot be ignored
If you hear a buzzing, whistling, or "clicking" sound when you turn on the tap, it's not just a water flow problem. Usually, this noise is caused by a fault in the internal parts of the faucet or a water pipe pressure problem, which may affect the normal use of the faucet.
Possible cause
Water Hammer phenomenon (Water Hammer) : When the water flow suddenly stops or changes, the water hammer effect will produce strong vibration, resulting in noise inside the pipe.
Loose or damaged Cartridge: Loose or worn parts inside the cartridge can cause water flow disturbances and may also cause noise.
Solution
Installation of water hammer shock absorber can effectively reduce the noise caused by water hammer. If the noise is coming from the faucet itself, the spool usually needs to be replaced. Selecting a suitable bathtub faucet replacement part to repair the spool can solve this problem and eliminate the flow noise.
Conclusion
If you’re faced with any of the issues above with your bathtub faucet, replacing the correct bathtub faucet replacement parts is no doubt the fast way to save on your water bill, improve your bathroom experience, and prevent a larger repair bill.
The employee specializes in bathtub faucet inspection and repair, they may help "idiots" save a lot of money, as well as preventing the source of trouble, do not let the bathtub faucet suddenly broken. Look at your faucet now and see if any parts need to be replaced to restore your bathroom back to tiptop shape.
Shop our selection of bathtub faucet replacement parts now to discover the options that will suit your needs.
FAQ
1. Why does the newly replaced spool still drip?
It may be that the Valve Seat is not cleaned, it is recommended to clean the valve seat with vinegar solution or special cleaning agent before installing the new spool to ensure the sealing effect.
2. Do you need special tools to replace faucet parts?
Most part replacements only require an ordinary wrench and screwdriver, and in some cases an Allen wrench may be required. If pipe removal is involved, pipe wrenches may be required.
3. When should you replace the entire faucet?
If the faucet has been used for more than 10 years, or if multiple parts have been replaced but the problem persists, it is recommended to replace the bathtub faucet directly to ensure long-term effectiveness and water efficiency.
Popular Articles:
How to Replace a Bathtub Faucet Cartridge: Easy Steps and Tips
How to choose the best bathtub faucet filter for you?
How to Remove Bathtub Faucet: A Comprehensive Guide for DIY Enthusiasts
