60" W x 58" H Matte Black Framed Double Sliding Bathtub Shower Doors

Premium Shower Doors for Just $489.99

Get premium features like leak-proof sealing, durable aluminum, and 1/4" tempered glass—all for just $489.99. ACE Decor delivers $600+ quality at a fraction of the price.

>97° Angled Water Seal

Thanks to the >97° angled bottom seal, water stays inside the shower where it belongs—leaving your floor dry and your cleanup minimal.

ANSI-Certified 1/4" Glass

1/4'' tempered glass with shatterproof film and stress relief design, this glass is impact resistant, reduces the likelihood of breakage, as well as reduces the risk of injury to your family.

$19.90 for Full Coverage

For only $19.90, include our upgrade service — broken glass, wrong sizes or damages? we'll give you all new stuff for free. ACE Decor has you covered.

No Hassle Setup

High quality hardware with clear illustrated step-by-step instructions, ideal for the first timer DIYer. All pieces are clearly marked for easy, frustration free assembly. And whenever you need assistance, our support team is immediately available, with a satisfaction rating greater than 98%.

Adjustable Rollers

Never again fight crooked walls—eccentric wheels allow for vertical give of up to 1/4", for an easy, clean fit and smooth glide even on less-than-ideal track conditions.

Why Pay $600 or More for the Same Quality?

With such a model, you get top-notch performance, assured safety, and a cool, modern style—all at only $549.99.

From the glass to the frame to our support system, we started by refining every detail at this price point, ensuring you get more bang for your buck. It's not only less expensive; it's also the more intelligent investment.

Prepared to enhance the comfort and elegance of your tub?

Get all of your must-haves—slim profile, certified safety, and smart waterproofing—in one place, for $549.99 with the 2112 series 60″ shower door.

It's sleek and DIY friendly, and designed with ANSI-certified tempered glass and accurate-fit seals to avoid any leaks. You'll also receive legitimate after-sales support and a free replacement service if anything goes wrong.

Ideal for any bath enclosure that needs a clean, modern finish — stress-free.

Key Features & Benefits

1. Safety Built In, In Use In The Real World

• Structural design, this shower door has 6mm (1/4")ANSI-certified clear tempered glass and brushed nickel finish wall profile to create a strengthen compression, impact and corrosion resistant.
• The frame is cut to precision with no drilling around the edges or weak points, reducing wear and increasing overall strength.
• We've even installed an explosion-proof safety film that keeps the glass in one solid piece—even if it shatters during shipping, installation, or use, ensuring no dangerous fragmentation. And if anything goes wrong? We'll replace it.
  
• Finally, precision CNC-machined ensures perfectly spaced holes and a smooth, flawless finish for increased strength you can see and feel.
  

2. Waterproof. Quiet. Reliable.

• The 97° angled threshold is sloped to help direct water back into the tub and prevent water from spilling onto the bathroom floor.
• Full-length silicone glass seals creates a soft, cushioned fit and it adds comfort, as well it also helps to reduce the noise and block the flow around the frame.
• And because of our flush-fit wall design, there are no spaces between the glass and the wall—so every drop of water will stay where it belongs and your shower will have a cleaner, more high-end look than you ever thought possible with bumpers made through ordinary production methods.

3. Safety Engineering You Can Trust

• A longer glass guide block helps support more of the panel's edge, which lends extra stability and reduces any wobble while the door is sliding.
• A top rail that is reinforced with anodized aluminum ensures that everything moves smoothly — and won't sag — even after years of use.
• All of the hardware is made from 304 stainless steel, so it's built to last and rust-resistant, making it ideal for moist, damp environments, like your bathroom.
• And the double towel-bar handles are more than functional — when not in use, they act as towel holders, making great use of your wall space and remaining ergonomic and rust free with a clean, modern look.
• Plus, the rounded frame edges are a subtle but important touch—keeping things safe during installation and daily use by reducing the risk of scratches or bumps.

Read More >

Measure the doorways leading up to your bathroom to ensure you can carry the shower door through your house without damaging the glass. Make sure there is room to turn your shower door if necessary.

What You Will Need

• At least two people
• Tape measure
• Pen & paper
• Level

Step 1: Make a Sketch of Your Shower

With your pen and paper, sketch a small diagram of your shower. Use this visual reference to label your measurements.

Step 2: Measure the Width

Using your tape measure, measure the width of your shower from one side of the wall to the other. Measure the width in three spots – along the base, middle, and top. See Image 1.

If you have a neo-angle shower, measure the width in sections along the base of the shower pan. See Image 2.

Step 3: Check if the Walls Are Plumb

Older homes or showers may not have walls that are perfectly straight. If your wall is plumb, meaning straight up and down, you should have a worry-free shower door installation. If your walls are not plumb, you should seek the help of a professional when installing your shower door. To check if your shower walls are plumb, place your level flat against each shower wall. Look at the bubble on the level and see if it is centered between the two indication lines. If the bubble is centered, the wall is plumb. If the bubble is not centered, angle the level away from the wall until it is. Holding the level in this position, mark the distance between the wall and the level on your measurement sheet. Share these measurements with the professional who will be installing your shower door. Do this at the bottom and top of each wall to ensure they are plumb all the way up. See Image 3 below.

Step 4: Measure the Height

Measure the distance from the base of your shower to its top. If your shower door will rest on a threshold, have your measurement begin at the top of this "base.” See Image 4. If your desired shower door size is shorter than your shower's overall height, only measure up to this point. See Image 5.

Step 5: Measure the Opening

If your new shower door will be the same style as your current door, measure the width of the current door and use that measurement as a reference. If your new door will sit over a section of the threshold that you have previously measured, use this width. See Image 6. If your shower door will be smaller than your threshold's width, measure your desired width. An example would be a fixed shower door that only covers three-fourths of your threshold's overall width. See Image 7.

Shipping Made Easy

We're happy to offer free shipping on all orders within the continental United States—no surprises, just straightforward service.

• Small packages usually arrive within 3–7 business days (plus 1–3 days processing).
• Larger items take a bit longer, typically 5–10 business days to reach you.

If anything arrives damaged, please let us know within 72 hours so we can make it right:

Call us at +1 860-397-3699

Or email sales@acedecorbath.com

Hassle-Free Returns

We want you to feel confident shopping with us, so we offer a 30-day money-back guarantee from the delivery date for products that arrive with quality issues or remain unopened in their original packaging.

For health and safety reasons, we can't accept returns or refunds if the item has been opened, installed, or used—unless there's a confirmed defect.

If you need to start a return, just reach out to our Customer Support team at sales@acedecorbath.com. We'll help you check eligibility and guide you through the process.

Please note, returns won't be accepted if:

1. The product has been opened, installed, or used without any quality concerns
2. Original parts or packaging are missing
3. We aren't contacted within 30 days of delivery

Your satisfaction is our priority—thank you for choosing Ace Decor!

At Ace Decor, we stand behind the quality of our products. Your purchase is backed by our Limited Warranty, covering manufacturing defects in materials and workmanship under normal residential use.

• Glass Panels – Lifetime Limited Warranty
• Hardware Components – Lifetime Limited Warranty
• Plastic Seals & Vinyl Parts – 1-Year Limited Warranty

For full warranty terms, including conditions for installation, care guidelines, and coverage details, please click here to view our full Warranty Policy.

Rest assured, with Ace Decor, you're choosing long-term performance, style, and peace of mind.