60" x 76" Brushed Nickel Frameless Shower Sliding Door with Towel Bar

SKU ACE-P198051-SD-6077-N

$659.99 $799.99 🔥 Save

Size (60 x 76)

Adding to Cart Added to Cart
  • 5/16″ thick safety glass — strong + easy to clean
  • 36,000+ slide-tested 304 stainless steel hardware
  • Frameless design = fewer edges = less grime
  • Door-with-bracket towel rack = one less thing to mount
  • A neat option to consider for shower doors sliding in a contemporary bathroom

Direct from the Factory – No Middleman, No Markup

7-Day Price Protection – Claim the difference if the price drops

Installation Instructions

Installation Instructions Icon Installation Guide.pdf

Simple routines begin with a bathroom that feels airy and effortless.

This bypass sliding shower door can make your space feel cleaner — all due to a functional, frameless design that gets the job done without interfering with your enjoyment of the space.

  • Single-sliding panel: One fixed panel, one sliding — great for smaller bathrooms where space is limited.
  • Two handles, one clever layout: A vertical handle for access and a horizontal towel bar for daily use — without additional wall fixtures.
  • 5/16” thick glass: Deep laminated safety glass with polished edges and nano coating that helps prevent water spots.
  • Frameless design: These types of glass sliding shower doors reduce visual clutter for a more open aesthetic.
  • Quiet-close rollers: Built-in soft-close buffer allows you to open and close smoothly and quietly, even on busy mornings.
  • Brushed Nickel: Matches most modern fixtures and resists rust and watermarks.
  • Adjustable fit: 56”–60” width: Ideal for remodeling or minor wall irregularities—no full tear-down needed.
Specification Model 1 – 60” x 70” Model 2 – 60” x 76”
Overall Height 70 11/16" 76 11/16"
Adjustable Width 56" – 60" 56" – 60"
Panel Widths 27 7/8" (fixed) + 32 1/8" (sliding) 27 7/8" (fixed) + 32 1/8" (sliding)

Just decide what size works for you, measure your opening, and enjoy a bypass sliding shower door that fits right into the way you live.

Measure the doorways leading up to your bathroom to ensure you can carry the shower door through your house without damaging the glass. Make sure there is room to turn your shower door if necessary.

What You Will Need

  • At least two people
  • Tape measure
  • Pen & paper
  • Level

Step 1: Make a Sketch of Your Shower


With your pen and paper, sketch a small diagram of your shower. Use this visual reference to label your measurements.


Take each measurement twice, and if your numbers differ, go with the larger one. Always round to the nearest 1/16ʺ for accuracy. If you opt for a custom shower door, knowing precisely how to measure for a glass shower door is even more essential.

Step 2: Measure the Width


Using your tape measure, measure the width of your shower from one side of the wall to the other. Measure the width in three spots – along the base, middle, and top. See Image 1.

If you have a neo-angle shower, measure the width in sections along the base of the shower pan. See Image 2.

Step 3: Check if the Walls Are Plumb


Older homes or showers may not have walls that are perfectly straight. If your wall is plumb, meaning straight up and down, you should have a worry-free shower door installation. If your walls are not plumb, you should seek the help of a professional when installing your shower door. To check if your shower walls are plumb, place your level flat against each shower wall. Look at the bubble on the level and see if it is centered between the two indication lines. If the bubble is centered, the wall is plumb. If the bubble is not centered, angle the level away from the wall until it is. Holding the level in this position, mark the distance between the wall and the level on your measurement sheet. Share these measurements with the professional who will be installing your shower door. Do this at the bottom and top of each wall to ensure they are plumb all the way up. See Image 3 below.

Step 4: Measure the Height


Measure the distance from the base of your shower to its top. If your shower door will rest on a threshold, have your measurement begin at the top of this "base.” See Image 4. If your desired shower door size is shorter than your shower's overall height, only measure up to this point. See Image 5.

Step 5: Measure the Opening


If your new shower door will be the same style as your current door, measure the width of the current door and use that measurement as a reference. If your new door will sit over a section of the threshold that you have previously measured, use this width. See Image 6. If your shower door will be smaller than your threshold's width, measure your desired width. An example would be a fixed shower door that only covers three-fourths of your threshold's overall width. See Image 7.

If your new door will swing outward (hinged, pivot, or folding doors), take your tape measure and make it the desired width of your shower door, then place one end of the tape measure where the door's hinge would be. Holding it in place, pull the tape measure in a semicircular motion. This will determine if there is sufficient room for it to open without hitting a wall, door, or vanity. See Image 8.

Shipping Made Easy

We're happy to offer free shipping on all orders within the continental United States—no surprises, just straightforward service.

  • Small packages usually arrive within 3–7 business days (plus 1–3 days processing).
  • Larger items take a bit longer, typically 5–10 business days to reach you.

If anything arrives damaged, please let us know within 72 hours so we can make it right:

Call us at +1 860-397-3699

Or email sales@acedecorbath.com

Hassle-Free Returns

We want you to feel confident shopping with us, so we offer a 30-day money-back guarantee from the delivery date for products that arrive with quality issues or remain unopened in their original packaging.

For health and safety reasons, we can't accept returns or refunds if the item has been opened, installed, or used—unless there's a confirmed defect.

If you need to start a return, just reach out to our Customer Support team at sales@acedecorbath.com. We'll help you check eligibility and guide you through the process.

Please note, returns won't be accepted if:

  1. The product has been opened, installed, or used without any quality concerns
  2. Original parts or packaging are missing
  3. We aren't contacted within 30 days of delivery

Your satisfaction is our priority—thank you for choosing Ace Decor!

At Ace Decor, we stand behind the quality of our products. Your purchase is backed by our Limited Warranty, covering manufacturing defects in materials and workmanship under normal residential use.

  • Glass Panels – Lifetime Limited Warranty
  • Hardware Components – Lifetime Limited Warranty
  • Plastic Seals & Vinyl Parts – 1-Year Limited Warranty

For full warranty terms, including conditions for installation, care guidelines, and coverage details, please click here to view our full Warranty Policy.

Rest assured, with Ace Decor, you're choosing long-term performance, style, and peace of mind.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)